Stubby Screwdriver

ALL DIMENSIONS ARE APPROXIMATE DUE TO MINOR PART TO PART VARIANCE

Total length (bit clip closed): 100mm (4")

Total length (bit clip open): 125mm (4.9")

Widest point (handle): 37.0mm (1.4")

Shaft length: 15mm (0.6")

Weight: 0.34lbs

Handle, selector, end cap, shoulder ring, bit tube: Triax 1120

Bit clips, slotted spacer, clip retaining pin, ratchet kicker, ratchet transfer cup, black accent ring: Delrin 500

Ratchet retaining clip, ratchet shaft collar: Acetal

Orange accent ring: ABS

Cast ratchet housing & integrated bit clip spline shaft: Zinc (ZAMAK 3)

Silver rotating shaft: Passivated 303 stainless steel

Ratchet gear: S2 steel (HRC60 +/- 2)

Ratchet springs: Spring steel 0.35mm gauge

Broach magnet: N52 (5.4N+ pull force)

Ball bearings: Stainless steel

Pawls: K5 steel (HRC 45-50)

LTT Screwdriver Limited Lifetime Warranty

The LTT Screwdriver is covered by a limited lifetime warranty against breakage due to defects in materials or workmanship for the usual and customary life of the tool.

The limited lifetime warranty does not cover:

• Bits, as they are considered a consumable item;
• Tools which have been subject to abuse, misuse, negligence, or improper storage;
• Tools which have been used improperly e.g. using the screwdriver as a pry bar or hammer;
• Tools which have been altered in any way;
• Normal wear and tear (including the breakdown of materials over time);
• Cosmetic damage (including scratches or changes in the finish of the plastic handle);
• Products purchased from unauthorized dealers

To complete your warranty claim you must send your product to the address provided by our customer service team. Creator Warehouse, Inc. reserves the right to inspect your product to determine if it is subject to this warranty. If we determine that your product is covered by this warranty, we will (at our discretion): (1) repair the product at no charge for labour or parts, (2) replace the product with the same model product, (3) replace the product with a comparable product should your product be discontinued or otherwise unavailable, or (4) provide you with a voucher to be used toward the purchase of other products on LTTStore.com.

In order to make a warranty claim, you must be the original purchaser of the LTT Screwdriver from LTTstore.com or provide a copy of the original proof of purchase.

Note: Stubby Screwdrivers will be shipping in waves due to high initial demand. If you have any questions or concerns with the ship date shown on this page at the time of purchase, please reach out to our support team.

The coating on our limited edition black shaft version is very prone to wear - visual wear on that coating is not covered under warranty.

Sometimes great things do come in small packages! The LTT Stubby Screwdriver shares many of the same amazing features of the full-sized LTT Screwdriver in a much smaller format to make daily carrying easier than ever before. Thanks to the 4" length, you can even bring it on planes in the US & Canada!

The short stainless steel shaft features the same aggressive diamond knurling found on our full-sized driver, with a strong broach magnet to ensure your screws & bits stay in place. The internal bit storage has space for up to 6 20mm "shorty" bits, and our included bit set features the daily carry that we believe will suit you best - PH0, PH1, PH 2, SL4, SL6, and our popular magnet bit. 

The ratchet is based on Megapro's long-standing & reliable design, but has been significantly modified to suit our needs. We reversed the ratchet direction (right for clockwise, left for anti-clockwise), adjusted the spring for lighter back-force which allows you to ratchet-drive even very small screws, and optimized for smoothness and quiet function. We've also significantly shortened the internal spline on the ratchet to fit the short format on the Stubby Screwdriver. It's rated for operation of up to 170 inch-pounds (20Nm) of torque.

All external plastics are Triax 1120 - a Nylon and ABS polymer which is great for injection molding parts like ours - for its overall durability and chemical resistance.

Internal plastics in our ratchet are made from Delrin for its self-lubricating properties, and our ratchet housing is made from Zinc.

Our industrial-looking black phosphate-coated S2 steel bits are durable and rust resistant. (NOTE: Bits are a consumable item and will wear or break down over time. Visual wear to the black phosphate coating is normal and expected.)

Other bit sets are available for purchase at https://www.lttstore.com/products/bits

Using patents from Megapro Tools Inc.: 5,265,504 & 7,258,046