Back to shop
Skip to product information
1 of 24

Stubby Screwdriver

Stubby Screwdriver

Regular price $59.99 USD
Regular price Sale price $59.99 USD
Sale
Select Handle Color:  
Select Shaft Color:  

Sold Out (this item will not be restocked)

Size Guide

ALL DIMENSIONS ARE APPROXIMATE DUE TO MINOR PART TO PART VARIANCE

Total length (bit clip closed): 100mm (4")

Total length (bit clip open): 125mm (4.9")

Widest point (handle): 37.0mm (1.4")

Shaft length: 15mm (0.6")

Weight: 0.34lbs

Product Information

Handle, selector, end cap, shoulder ring, bit tube: Triax 1120

Bit clips, slotted spacer, clip retaining pin, ratchet kicker, ratchet transfer cup, black accent ring: Delrin 500

Ratchet retaining clip, ratchet shaft collar: Acetal

Orange accent ring: ABS

Cast ratchet housing & integrated bit clip spline shaft: Zinc (ZAMAK 3)

Silver rotating shaft: Passivated 303 stainless steel

Ratchet gear: S2 steel (HRC60 +/- 2)

Ratchet springs: Spring steel 0.35mm gauge

Broach magnet: N52 (5.4N+ pull force)

Ball bearings: Stainless steel

Pawls: K5 steel (HRC 45-50)

Warranty

LTT Screwdriver Limited Lifetime Warranty

The LTT Screwdriver is covered by a limited lifetime warranty against breakage due to defects in materials or workmanship for the usual and customary life of the tool.

The limited lifetime warranty does not cover:

  • Bits, as they are considered a consumable item;
  • Tools which have been subject to abuse, misuse, negligence, or improper storage;
  • Tools which have been used improperly e.g. using the screwdriver as a pry bar or hammer;
  • Tools which have been altered in any way;
  • Normal wear and tear (including the breakdown of materials over time);
  • Cosmetic damage (including scratches or changes in the finish of the plastic handle);
  • Products purchased from unauthorized dealers

To complete your warranty claim you must send your product to the address provided by our customer service team. Creator Warehouse, Inc. reserves the right to inspect your product to determine if it is subject to this warranty. If we determine that your product is covered by this warranty, we will (at our discretion): (1) repair the product at no charge for labour or parts, (2) replace the product with the same model product, (3) replace the product with a comparable product should your product be discontinued or otherwise unavailable, or (4) provide you with a voucher to be used toward the purchase of other products on LTTStore.com.

In order to make a warranty claim, you must be the original purchaser of the LTT Screwdriver from LTTstore.com or provide a copy of the original proof of purchase.

Description

 

Sometimes great things do come in small packages! The LTT Stubby Screwdriver shares many of the same amazing features of the full-sized LTT Screwdriver in a much smaller format to make daily carrying easier than ever before. Thanks to the 4" length, you can even bring it on planes in the US & Canada!

The short stainless steel shaft features the same aggressive diamond knurling found on our full-sized driver, with a strong broach magnet to ensure your screws & bits stay in place. The internal bit storage has space for up to 6 20mm "shorty" bits, and our included bit set features the daily carry that we believe will suit you best - PH0, PH1, PH 2, SL4, SL6, and our popular magnet bit. 

The ratchet is based on Megapro's long-standing & reliable design, but has been significantly modified to suit our needs. We reversed the ratchet direction (right for clockwise, left for anti-clockwise), adjusted the spring for lighter back-force which allows you to ratchet-drive even very small screws, and optimized for smoothness and quiet function. We've also significantly shortened the internal spline on the ratchet to fit the short format on the Stubby Screwdriver. It's rated for operation of up to 170 inch-pounds (20Nm) of torque. Due to its smaller size, the Stubby's ratchet may feel slightly different than your standard LTT Screwdriver, but it packs the same high performance in a much smaller footprint!

All external plastics are Triax 1120 - a Nylon and ABS polymer which is great for injection molding parts like ours - for its overall durability and chemical resistance.

Internal plastics in our ratchet are made from Delrin for its self-lubricating properties, and our ratchet housing is made from Zinc.

Our industrial-looking black phosphate-coated S2 steel bits are durable and rust resistant. (NOTE: Bits are a consumable item and will wear or break down over time. Visual wear to the black phosphate coating is normal and expected.)

Other bit sets are available for purchase at https://www.lttstore.com/products/bits

Using patents from Megapro Tools Inc.: 5,265,504 & 7,258,046

Related Products
View full details

Customer Reviews

Based on 310 reviews
90%
(280)
7%
(22)
2%
(5)
0%
(1)
1%
(2)
C
Chris Hicks
Expectations met

For the much hype, I was pleasantly surprised. Getting the bits out of storage is better than any other driver I've had which I love, and the magnetic force is amazing.

R
Ross Callen
High quality, low size

The bits are difficult to remove due to the size of the handle, but this is still the best stubby screwdriver I've ever used!
Everything I love about the regular sized screwdriver, but small.

J
Jeramei Taylor
it's... Decent

TLDR: Good but not great. Don't buy unless you're too curious like I was.

Bought the screwdriver because I (1) was so curious after the positive press and (2) didn't own a ratcheting stubby, thought it could be an edc.

I'm going to start off by saying it's not a bad screwdriver. Mechanism works fine, feels nice to hold, finish is ok. But the thing is I've got less backdrag force on a 15 year old mastercraft screwdriver I bought in a kit with legit 95 other screwdrivers for CA $25 total. Even adjusting for inflation that doesn't really add up, but I was expecting it to be a bit overpriced so I'm not upset about that. My whole thing though is that there's really nothing all that amazing about it. Mechanism feels nice and I was impressed at first but then I compared it and was like oh, I can spin all my ratcheting screwdrivers, from the handle, and this one is actually kinda stiff in comparison. I don't think it's defective though because it seems to spin the same way it does in reviews I've seen. I've had megapro screwdrivers before ever even hearing of LTT and that bit storage is definitely exactly as nice as megapro. Then also the size is just way too long to really work for what a stubby should be.

Don't get me wrong though, it's not a bad product, it's just not an amazing product, and it's a caution to buying anything recommended by influencers and others trying to justify their purchase. I'm going to keep it, but it's still just an ok screwdriver at an extremely premium price, that will never feel reasonable. Even if having everything that this does in the same package doesn't exist anywhere else.

B
Brandon

Great screwdriver. Perfect for PC building and love the extra magnetic hold. This is my second so I can have one for work

K
Kate

The normal screwdriver is great and the stubby has proven super useful in more confined spaces.

Customer Reviews

Based on 310 reviews
90%
(280)
7%
(22)
2%
(5)
0%
(1)
1%
(2)
C
Chris Hicks
Expectations met

For the much hype, I was pleasantly surprised. Getting the bits out of storage is better than any other driver I've had which I love, and the magnetic force is amazing.

R
Ross Callen
High quality, low size

The bits are difficult to remove due to the size of the handle, but this is still the best stubby screwdriver I've ever used!
Everything I love about the regular sized screwdriver, but small.

J
Jeramei Taylor
it's... Decent

TLDR: Good but not great. Don't buy unless you're too curious like I was.

Bought the screwdriver because I (1) was so curious after the positive press and (2) didn't own a ratcheting stubby, thought it could be an edc.

I'm going to start off by saying it's not a bad screwdriver. Mechanism works fine, feels nice to hold, finish is ok. But the thing is I've got less backdrag force on a 15 year old mastercraft screwdriver I bought in a kit with legit 95 other screwdrivers for CA $25 total. Even adjusting for inflation that doesn't really add up, but I was expecting it to be a bit overpriced so I'm not upset about that. My whole thing though is that there's really nothing all that amazing about it. Mechanism feels nice and I was impressed at first but then I compared it and was like oh, I can spin all my ratcheting screwdrivers, from the handle, and this one is actually kinda stiff in comparison. I don't think it's defective though because it seems to spin the same way it does in reviews I've seen. I've had megapro screwdrivers before ever even hearing of LTT and that bit storage is definitely exactly as nice as megapro. Then also the size is just way too long to really work for what a stubby should be.

Don't get me wrong though, it's not a bad product, it's just not an amazing product, and it's a caution to buying anything recommended by influencers and others trying to justify their purchase. I'm going to keep it, but it's still just an ok screwdriver at an extremely premium price, that will never feel reasonable. Even if having everything that this does in the same package doesn't exist anywhere else.

B
Brandon

Great screwdriver. Perfect for PC building and love the extra magnetic hold. This is my second so I can have one for work

K
Kate

The normal screwdriver is great and the stubby has proven super useful in more confined spaces.