LTT Precision Pro Multi-bit Screwdriver

During my time with the screwdriver, ive noticed one flaw that ive actually managed to scratch my end cap with - The Instructions for taking out the end caps to replace and swap. Once you figure it out, its fine, but it was a very steep learn, and for a first time use, you WILL try to use something that WILL scratch everything. Its a great screwdriver, but im bumbed about my end cap being scratched :c (4.7/5)

Christmas present for my husband and he loves this multi-bit screwdriver and has already found many cases where he's had to use it. It's his new go-to screwdriver for anything small and precise.

screwdriver itself is superb.
handles well, feels solid, and with the bit case you should be able to open most things.
I only hate the fact that I could only get it reasonably priced when there was a free shipping deal (along with other goodies) as I am overseas, but I understand the difficulty and costly nature of shipping overseas so no points off.

I can't review something if i don't have it.

Despite the unique design of the driver, I cannot recommend it due to LTT's poor customer service, and the quality of the materials. My driver failed after less than a year when the tip assembly fell out. I sent high-quality photos of the damage, and support insisted it was a bearing issue and sent a replacement. I expressed skepticism, noting that I run a high-volume repair shop, but they assured me it would work. It did not. After this incident, they requested the exact same photos I had already provided twice, then accused me of improper installation. I responded with detailed photos showing sheared threads inside the shaft, proving a hardware defect rather than user error, but they continued to blame me. While they did eventually offer a refund, the accusation of incompetence despite clear evidence of a defect was disappointing. Waiting the nearly 4 months to receive this, only to have it fail a short while later and have my time wasted by lackluster support, is thoroughly disappointing. I expected much better from LTT.

I’ve attached a picture of the shredded threads. So you can make your own judgement. According to LTT, “This is normal”. I have went back to my iFixIt driver, which I’ve had for over 5 years with no issues.

The LTT Precision Multi-Bit Screwdriver feels well-made and high quality. I particularly like the magnets that snap the retractable bit storage in place. Overall, it has a premium feel and performs as expected.

This screwdriver is honestly above par. Think of it as the Apple-level version in this category. Sleek, precise, and just beautifully made. A standout Precision Multi-Bit Screwdriver.

Amazing absolutely love this screwdriver the magnet is like no other screwdriver on this planet. It's absolutely amazing. I want to make a full video about this screwdriver

I love the magnetic lid. It's detachable

been using it for some time and Im loving it im autistic and the fidget gimmick kinda loved it so far better than the "blue tip" team tbh. i wish It came with blue tip my only but but not a dealbreaker is i cant remove the tip easily i wish it was easier i almost broke my nail trying but someday i will make it Thanks LTT also with the JRE Razor was a dealmaker because my razor got stolen a while ago and i was looking for one and this deal was perfect so far

Great service, premium feel tools 61 piece precision bit set really impressed me. All my other goodies arrived in perfect condition. My wife also loved her commuter bag. Many thanks from Leyland England. I will be placing another order before Christmas.

Love it I bought it for dismantling tech, ended up notdoing an of that. But because of the variety of bits I have founda lot of use cases where I was glad I had it. It can even tighten up my glasses. Sounds like a dumb use case, but it is something I would normally have to pay someone20 euros for so it’s already earned itself back ;)

Comfortable, perfect for those precision jobs. I use it to disassemble my window cleaning gear so I can finally clean it and wow I'm amazed at the quality. Thanks alot!

While this is a really good little screwdriver, it should at least come with 3 or 4 bits as well instead of having to buy the entire LTT bit set, many which I wouldn't use. I managed to find a basic bit set on Amazon for $10 that work well with this screwdriver.

Do not attempt to remove the cap, I used the method described in the video and the cap was on so tight it damaged the tolerances on the bearing making it so the cap no longer spins as easy as it should. I regret getting the free caps that caused me to try to replace them as I would have been more content without swapping them.
Otherwise the screwdriver works mostly as intended. The bit set holder works well as a travel case.

Pretty good; comparitively not worth $30 USD plus shipping, especially without any bits which I didn't see when I bought the thing, but well made and good looking. I like the finer knurling, but hot dang these things are small. If you have larger hands this thing looks a little silly, but no more so than any other precision screwdriver. I look forward to further testing.
Update after a few days: It's absurdly fun dangit, 5/5

The way the bit storage opens and closes feels great! The spinner on the top is very smooth, and does spin for a long time :)
The screwdriver itself is very well-machined.

Unfortunately, I was very excited at the time of purchase and did NOT see that not a single bit come with the screwdriver.

I assumed that the 2 basic bits would come with it, 1 Flat, and 1 Philips.

I didn't get the large bit set because I have an iFixit kit.

After receiving the screwdriver, I went back to the LTT Store purchase page and checked that it did state that the bits were not included, but it was not highlighted like it is now.

It would also be better to highlight the words, "BITS SOLD SEPARATELY", in the pictures with a yellow background so people don't miss it.

I have the kit for my desk, and this is my traveler mini screwdriver.
I had to take 3 bits from my kit to put into this screwdriver.

If LTT were to do this over, I think the screwdriver should have shipped with 1 Flat, and 1 Philips LTT bit.

My bit of disappointment is on me I guess for not seeing the info about the lack of bits.

Maybe LTT could sell an basic 3-4 bit set that can be added onto an order. I don't need another large bit set, but would like a small basic LTT bit option.

I ordered the LTT Precision driver and some bits and did not receive the driver in the order and had to have it reshipped. Found out they also didnt send me the correct precision bits that i ordered. Disappointed since i have the OG screwdriver since release and have had no issues with it to this day (still use it everyday)

Love the spinny top

Wish it was a little bit heavier, but it’s very well made

I mean I have other screwdrivers, a klein with bit storage, my ifixit mako is pretty broken in too, and has an aluminum handle

But boy does this one spin, and oh does it bring me joy to spin it.

Spinney!

The spin action is next level.
The bit storage is a leap above the blue brand.

High quality tool. Never disappointed with CW.