Screwdriver

Our ratcheting multi-bit screwdriver features a knurled stainless steel shaft with a strong embedded magnet, internal storage for 12 "shorty" 20mm bits (or 6 full-sized bits), an in-house designed three-lobe handle for comfort and ergonomics, and a tastefully-embossed LTT logo on the end cap.

The ratchet is based on Megapro's long-standing & reliable design, but has been significantly modified to suit our needs. We reversed the ratchet direction (right for clockwise, left for anti-clockwise), adjusted the spring for lighter back-force which allows you to ratchet-drive even very small screws, and optimized for smoothness and quiet function. It's rated for operation of up to 220 inch-pounds of force.

Our bit storage is another collaboration with Megapro. We utilized their patented bit clip storage design, but adjusted the length of the clips & the size of the total cavity to allow for our smaller, more ergonomic handle.

All external plastics are Triax 1120 - a Nylon and ABS polymer which is great for injection molding parts like ours - for its overall durability and chemical resistance. The only exception is the black "accent ring" on the all black versions, which are made from machined Delrin, and the orange "accent ring" on the black & orange version, which are made from injection molded ABS. 

Internal plastics in our ratchet are also made from Delrin for its self-lubricating properties, and our ratchet housing is made from Zinc.

Our industrial-looking black phosphate-coated S2 steel bits are durable and rust resistant.

Standard bit set included with the screwdriver: PH0, PH1, PH2, H2, H2.5, H4, SL2, SL4, SL6, SQ1, SQ2, and our 5x5 Magnet bit (affectionately named "The Screw Retriever") (This was previously listed as a 6x6 magnet bit, but that was incorrect. The size is 5x5mm)

NOTE: Bits are a consumable item and will wear or break down over time. Visual wear to the black phosphate coating is normal and expected.

Other bit sets are available for purchase at https://www.lttstore.com/products/bits

Using patents from Megapro Tools Inc.: 5,265,504 & 7,258,046

WARNING: Not compliant with airport security restrictions in some countries (including but not limited to US and Canada). Verify all security/travel restrictions before traveling with your screwdriver!

Handle, selector, end cap, shoulder ring, bit tube: Triax 1120

Bit clips, slotted spacer, clip retaining pin, ratchet kicker, ratchet transfer cup, black accent ring: Delrin 500

Ratchet retaining clip, ratchet shaft collar: Acetal

Orange accent ring: ABS

Cast ratchet housing: Zinc (ZAMAK 3)

Silver rotating shaft: Passivated 303 stainless steel

Bit clip spline shaft: Passivated 303 stainless steel

Ratchet gear: S2 steel (HRC60 +/- 2)

Ratchet springs: Spring steel 0.35mm gauge

Broach magnet: N52 (5.4N+ pull force)

Ball bearings: Stainless steel

Pawls: K5 steel (HRC 45-50)

Maximum torque: 220 inch-pounds

ALL DIMENSIONS ARE APPROXIMATE DUE TO MINOR PART TO PART VARIANCE

Total length (bit clip closed): 213mm (8.4")

Total length (bit clip open): 260mm (10.2")

Widest point (handle): 35mm (1.4")

Shaft length: 82.2mm (3.2")

Weight: 0.45lbs

LTT Screwdriver Limited Lifetime Warranty

The LTT Screwdriver is covered by a limited lifetime warranty against breakage due to defects in materials or workmanship for the usual and customary life of the tool.

The limited lifetime warranty does not cover:

• Bits, as they are considered a consumable item;
• Tools which have been subject to abuse, misuse, negligence, or improper storage;
• Tools which have been used improperly e.g. using the screwdriver as a pry bar or hammer;
• Tools which have been altered in any way;
• Normal wear and tear (including the breakdown of materials over time);
• Cosmetic damage (including scratches or changes in the finish of the plastic handle);
• Products purchased from unauthorized dealers

To complete your warranty claim you must send your product to the address provided by our customer service team. Creator Warehouse, Inc. reserves the right to inspect your product to determine if it is subject to this warranty. If we determine that your product is covered by this warranty, we will (at our discretion): (1) repair the product at no charge for labor or parts, (2) replace the product with the same model product, (3) replace the product with a comparable product should your product be discontinued or otherwise unavailable, or (4) provide you with a voucher to be used toward the purchase of other products on LTTStore.com.

In order to make a warranty claim, you must be the original purchaser of the LTT Screwdriver from LTTstore.com or provide a copy of the original proof of purchase.